Drainage lifting station
Hebefix Pro
All-In-One!
Areas of application: Disposal of domestic waste water and aggressive media up to 15 % salt content
Integrated alarm circuit for level-dependent alarm
- For dirty water and aggressive media
- For fluids up to 15 % salt content
- Pre-wall installation or direct connection
- Ready to connect
- Flushing device to reduce deposits in the tank
- Integrated alarm unit for level-dependent alarm
- Maintenance friendly
- High-quality plastic tank (ABS)
With the Hebefix Pro waste water lifting station, we offer an ‘all-in-one device’ that has been designed for the disposal of dirty water above or below the backflow level which is also suitable for many other areas of application.
It can be connected to all grey water dispensers, i.e. wash basins, showers, bath tubs, sinks, washing machines, household dishwashers, etc. The Hebefix Pro can also be used to pump aggressive media with a salt content of up to 15 %, e.g. from water softeners or condensate from gas heating systems or pellet boilers.
Thanks to its shallow tank depth, the Hebefix Pro fits into all commercially available pre-wall installation systems. However, its attractive design also allows it to be connected directly under a washbasin. This makes the Hebefix Pro to the ideal device for a renovation or reconstruction work when an additional bathroom or kitchen is required.
The unit can pump the dirty water through a small pressure pipe (from the left or right side) to the nearest downpipe.
The Hebefix Pro has an integrated alarm unit for high water alarms.
The device is supplied with a built-in pump (U3KS Spezial version), is ready to be plugged into a Schuko socket and operates fully automatically once the waste water inflow starts. The relevant VDE regulations must be observed for installation in bathrooms and showers.
For installation and maintenance works of the system, a sufficient service opening must be foreseen in a pre-wall installation. The system fulfils the requirements of EN 12050.
The unit includes a pump according to the German European standard EN 12050, ready-to-connect with cable and plug, complete with collars, outlet elbow, swing-type check valve 1¼", connecting nipple, ventilation insert, activated carbon filter, clamps and fastening material.
| Delivery head Hmax | 7 m |
| Flow rate Qmax | 6 m³/h |
Specifications can be changed without notice. Performance subject to ISO 9906 tolerances.
The minimum flow velocity in the pressure piping must be 0.7 m/s according to EN 12056.
This data is represented in the performance curve as a limit of application.
1 results
| Type | Code No. |
|---|---|
JP50050 |